Top 10 Wireshark Filters

2016.07.13 14:55

1.       ip.addr == [Sets a filter for any packet with, as either the source or dest]

2.       ip.addr==  && ip.addr== [sets a conversation filter between the two defined IP addresses]

3.       http or dns [sets a filter to display all http and dns]

4.       tcp.port==4000 [sets a filter for any TCP packet with 4000 as a source or dest port]

5.       tcp.flags.reset==1 [displays all TCP resets]

6.       http.request [displays all HTTP GET requests]

7.       tcp contains traffic [displays all TCP packets that contain the word ‘traffic’. Excellent when searching on a specific string or user ID]

8.       !(arp or icmp or dns) [masks out arp, icmp, dns, or whatever other protocols may be background noise. Allowing you to focus on the traffic of interest]

9.       udp contains 33:27:58 [sets a filter for the HEX values of 0x33 0x27 0x58 at any offset]

10.   tcp.analysis.retransmission [displays all retransmissions in the trace. Helps when tracking down slow application performance and packet loss]

LF0827 List/Windows

티스토리 툴바